Ⅰ Use of manual forklift:

1. Ascent: Press the switch on the elliptical handle to the lowest position, and then shake the elliptical handle up and down to ascend;

2. Lowering: Just lift the switch on the oval handle to lower the fork;

3. Transportation: Stop the switch on the oval handle to the middle position to start the transportation operation.

Ⅱ Things to note:

1. When placing pallets, there must be a foot’s width between the two pallets. When placing pallets, there must be a certain distance to facilitate the movement of the truck. When the wheels under the forks of the truck are just in front of the goods, You can turn;

2. Before use, you must know the braking position of the truck to facilitate timely parking. Do not operate in a hurry to avoid falling goods;

3. Do not stack goods that are too high on the forklift, especially fragile goods. You must be more careful and lower the forks. If the forks are longer than the pallet, be careful when driving;

4. Do not get on the forklift with one foot while driving;

5. When turning, observe whether there are pedestrians or vehicles moving around;

6. When the forklift is not in use, it should be placed in a standardized location so as not to affect other operations;

7. Be sure to support the middle of the pallet to prevent it from tilting or collapsing during driving;

8. Overloading is strictly prohibited. If a fault needs to be repaired in time, be sure to operate the manual hydraulic pallet truck correctly according to the accompanying instructions.